Customer Project

Remove Set in Grease Stains from your Deck

Browse Projects

  • Refreshed Side Table
    Side Tables that Stand Out
  • RockSolid 6x Deck
    Outdoor Decking DIY Project

For spot cleaning:

  1. Spray area to be cleaned with water. Always maintain a wet surface on area being cleaned.

    note: For best results this project should be completed out of direct sunlight. Do not let the product dry on the surface.
  2. Spray Original Krud Kutter directly onto the stains.
  3. Allow to penetrate the surface for 1 – 2 minutes.
  4. Agitate stained area with a scrub brush.
  5. Rinse well with water.
  6. Depending on how long the stain has been there a second application may be needed.

For general, over all cleaning using pressure washer:

  1. Rinse surrounding areas and vegetation with water.
  2. Rinse area to be cleaned with water.  Do not let the product dry on the surface.

    note: For best results this project should be completed out of direct sunlight. It’s also best to work small sections.
  3. Put siphon tube of the pressure washer directly into the bottle of Original Krud Kutter or pour product full strength into reservoir of the pressure washer.
  4. Spray at a low pressure onto the wet surface.
  5. Let sit for 3-5 minutes – do not allow the product to dry on the surface.
  6. Heavily soiled or mildewed areas may need to be scrubbed or a second application may be necessary.
  7. Repeat for all sections of your deck.
  8. Rinse surrounding vegetation again.

For general, cleaning with a hose:

  1. Mix 12 oz of product with 1 gallon of water in a bucket. 

    note: If heavily soiled it may be necessary to make the mixture slightly stronger with Original Krud Kutter.
  2. Rinse surrounding areas and vegetation with water.
  3. Wet a section of the deck to be cleaned.  Do not let the product dry on the surface.

    note: For best results this project should be completed out of direct sunlight. It’s also best to work in sections.
  4. Clean in sections with a soft bristle brush.
  5. Let sit for 3-5 minutes – do not allow the product to dry on the surface.
  6. Rinse cleaner off the surface with a hose.
  7. Heavily soiled areas may need a second application.
  8. Repeat for all sections of the deck.
  9. Rinse surrounding vegetation.